PLA · Models & decorative objects
PLA Marble
A stone-effect PLA for architectural and sculptural models.
Price, availability and delivery are confirmed by enquiry. Your selected SKU and spool option travel with your request.
PRINTING PARAMETERS
Starting points for your slicer.
From the company parameter sheet. Confirm the profile against your own printer, nozzle and build surface before a production run.
The source parameter sheet has no separate profile for this finish. The table below is the PLA Basic profile and is shown for reference only.
| Nozzle diameter | 0.4mm+ |
|---|---|
| Flow ratio | 0.98 |
| Bed temperature | 60-70°C (rec. 65) |
| Nozzle temperature | 190-230°C (rec. 220) |
| Cooling fan | 1 |
| Retraction (direct drive) | 0.8-1.5mm |
| Retraction (Bowden) | 4-6mm |
| Max volumetric speed | 16mm³/s |
| Recommended print speed | ≤200mm/s |
| Density (g/cm³) | 1.166 |
|---|---|
| Melt flow index (200 °C / 2.16 kg) | 10.4 |
| Heat deflection temperature (°C) | 54.4 |
| Vicat softening temperature (°C) | 52.3 |
| Tensile strength (MPa) | — |
| Tensile strength, X axis (MPa) | 42.93 |
| Tensile strength, Y axis (MPa) | 43.895 |
| Tensile strength, Z axis (MPa) | 22.185 |
| Elongation at break (%) | 10.2 |
| Flexural strength (MPa) | 53.7 |
| Flexural modulus (MPa) | 2313 |
| Impact strength (kJ/m²) | 4.55 |
DOCUMENTATION
Documents naming this range
We have not confirmed a document-to-range match for this range. Ask for the current SKU documentation, or browse the manufacturing partner’s general library.
Browse the general document library