TPU · Flexible parts & grips
Flex TPU 95A (high elasticity)
A high-rebound 95A TPU for parts that must flex and recover.
Price, availability and delivery are confirmed by enquiry. Your selected SKU and spool option travel with your request.
PRINTING PARAMETERS
Starting points for your slicer.
From the company parameter sheet. Confirm the profile against your own printer, nozzle and build surface before a production run.
Flex TPU 95A is described as a high-rebound material for parts that flex and recover. The catalogue lists two products in this range; use the published parameters as a starting point and confirm the current SKU documentation and printer profile before production.
The parameter sheet repeats the column header for this grade, so its column could not be matched to the grade with certainty. Treat these values as indicative until R&D confirms them.
| Nozzle diameter | rec. 0.6mm |
|---|---|
| Flow ratio | 0.98-1.02 (rec. 1) |
| Bed temperature | 30-45°C (rec. 35) |
| Nozzle temperature | 200-250°C (rec. 225) |
| Cooling fan | 1 |
| Retraction (direct drive) | 0.4-1.2mm |
| Retraction (Bowden) | Not recommended |
| Max volumetric speed | 5mm³/s |
| Recommended print speed | ≤80mm/s |
| Density (g/cm³) | 1.201 |
|---|---|
| Melt flow index (200 °C / 2.16 kg) | 11.2 |
| Heat deflection temperature (°C) | — |
| Vicat softening temperature (°C) | — |
| Tensile strength (MPa) | 14 |
| Tensile strength, X axis (MPa) | — |
| Tensile strength, Y axis (MPa) | — |
| Tensile strength, Z axis (MPa) | — |
| Elongation at break (%) | <450 |
| Flexural strength (MPa) | — |
| Flexural modulus (MPa) | — |
| Impact strength (kJ/m²) | — |
DOCUMENTATION
Documents naming this range
We have not confirmed a document-to-range match for this range. Ask for the current SKU documentation, or browse the manufacturing partner’s general library.
Browse the general document library